Please note, all prices are excluding parts and VAT
Services & Labour Fees
Petrol Rotary Lawnmowers
- Minimum charge: £55
- Domestic push mower service: £85
- Commercial push mower full service: £100
- Domestic self-propelled mower service: £100
- Commercial self-propelled mower service: £135
- Recoil starter repair (already removed from machine): £25
Petrol Hand-held Machines
- Minimum charge: £50
- Full service of hand-held blower: £75
- Full service of hand-held vac: £80
- Full service of backpack blower: £85
- Full service of chainsaw: £90
- Full service of pole saw: £105
- Full service of cut-off saw: £105
- Full service of kombi/multi tool (engine unit only): £75
- Multi-tool attachment repairs start at £25
- Full service of strimmer/brushcutter: £85
- Full service of hedge-cutter (short reach): £95
- Full service of hedge-cutter (long reach): £105
- Recoil assembly repair (already removed from machine): £22.50
Two stroke machines that require an engine rebuild will incur an additional labour fee on top of the service charge.
Battery/Electric Machines
- Minimum charge: £50
- Push lawnmower service: £65
- Self-propelled lawnmower service: £75-£95
- Strimmer/brushcutter service: £60
- Chainsaw service: £65
- Pole saw service: £70
- Cut-off saw service: £70
- Hedge-cutter service (short reach): £70
- Hedge-cutter service (long reach): £80
- Pressure washer repairs: £50-£105
Tractors/Riders
- Minimum charge: £100
- Full service: £260-£360 depending on size
Note: We can only accommodate one tractor at a time so please contact us before hand
Other Petrol Engine Powered Machinery
Other garden tools that we work on are:
- Tillers/cultivators/rotavators
- Scarifiers/aerators
- Chippers/shredders
- Scythe mowers
- Walk behind stump grinders
- Pressure washers (engine only)
If your machine is powered by one of the following engine manufacturers then we can do a repair/service on the engine only:
- Briggs & Stratton
- Honda
- Kawasaki
- Loncin
- Kohler
Labour rates start at £55
Sharpening Services
- Chainsaw chain: £10.50 (additional premium for carbide tipped chains)
- Chainsaw chain fitted to saw: £25 (additional premium for carbide tipped chains)
- Hedge-cutter blades: £37.50
- Long handled shears: £16.50
- Short handled shears: £14.50
- Loppers: £14
- Secateurs: £14
- Axe: £12.50
- Rotary mower blade (already removed from machine): £12.50
- Rotary mower blade sharpening (on machine): £25
- Tractor/rider blade sharpening (on machine): £35 plus £12.50 for each additional blade
Chipper blades (Straight edge only):
- Small chipper blade (up to 10") single-sided: £20
- Small chipper blade (up to 10") double-sided: £35
- Small chipper blade (over 10") single-sided: £35
- Small chipper blade (over 10") double-sided: £50
We do not sharpen cylinder mower blades
What's involved when servicing your machine?
We are not your average service agent.
We've broken mower servicing down into two main categories, a Commercial service and a Domestic service. The reason is machines that have domestic usage have little wear and tear in comparison with commercial usage. Commercial machines that have in-depth engine/drive issues will require a lot more time and spare parts to repair. When were fully servicing a machine, we like to make sure it is just like it was when it was new.
When we service a machine, it's more accurate to call it an overhaul/restoration because we are so thorough.
All petrol machines have their engine and drive systems stripped down, fluids drained and are then jet washed. This is mainly done so we can see for any failing parts that may be covered with debris. Electrical machines are hand cleaned.
All moving parts are inspected for correct function and any worn items (belts or bearings for example) are replaced. If the budget begins to creep up we contact you so there are no nasty surprises.
Every service job has the following replaced: air filter, recoil rope, spark plug, oil and diaphragms.
The carbs are all thoroughly cleaned using compressed air and then take a bath in our heated ultrasonic cleaner. Worn diaphragms/gaskets are replaced and then the carb is tuned.
Blades are sharpened and set (or replaced if really worn), cables are lubricated and adjusted.
We take pride in our craft and every service comes with a three month guarantee. Our work will not let you down!
(accidental damage, misuse or excessive wear and tear excluded).
Warranty Repairs
We are authorized warranty repair agents for the following brands:
- Billy Goat
- Cobra
- Echo
- Ego
- Kaaz
- Masport
- Mountfield
- Stiga
Please make sure your machine is still within its warranty period and you have the original purchase receipt.
All repairs are risk-free. You are only charged if a repair is successful. If we are unable to repair your machine for an economical price, you are not charged.
All of our repairs are backed by a three month guarantee. This excludes general wear and tear, misuse and accidental damage.
We do not work on stolen machines. Machines that have their serial numbers intentionally removed we will treat as stolen.